1. High quality purifying tower body shell:

Purification tower body shell is made of FRP or PP production. FRP is made of glass fiber reinforced vinyl resin, gel coat of the shell adding anti-aging agent it has a light weight, high strength, anti-corrosion, installed and disassembled freely etc.Pp polypropylene sheet hot melt welding. It has inner and outer surface smooth corrosion resistance to strong. These two kinds of materials are the general production purification tower project materials.

2. Pumping:

The Taiwan production vertical idling anti-corrosion pump. Its key parts wear, the use of PTFE (plastic king), corrosion part uses polycarbonate. Motor for Taiwan "Datong" or "TECO" brand the design can be idle, dry to normal running again, strong anti-corrosion performance

3. Accessories:

Known as the content of impurities contained in exhaust gas purification tower for the main parts as filler (PP) and nozzle (PP), the water level controller (PVC). Packing Ranching rings and Pall ring. He is according to nature, the concentration of exhaust gas and impurity and selected. Select what kind of packing, depends on the exhaust gas in the tower body and reaction time, exhaust gas. Adhesion material multiple blockage. Choose the appropriate packing of purification tower normal use is very important. The nozzle is designed for the purification of the tower and design, it is divided into three layers of spray, professional without blocking screw type multi-layer sprinklers. The water level controller: the water tank in the circulating water, often in the acid and alkali in exchange, the water level controller In order to prevent corrosion all plastic (PVC) products, it is the circulating water to regulate the water level.

4. Electric control box:

Electric control box with rainproof outdoor type, electrical components are imported and used in the motor power is equal to or larger than 11kw delta secondary started. According to the customer demand control box can be installed with pH indicator, ammeter, voltmeter overheating protection and automatic alarm device.

5. Enhanced anti-corrosion fan:

The shell and impeller are made of glass fiber reinforced vinyl resin. The fan has high strength, good corrosion resistance, and the bracket is made of steel plate bending and welding, and the surface is treated with EPOXY corrosion protection.

6. pipe:
The purification tower pipe is divided into the inlet pipe and the exhaust pipe and the water inlet and outlet pipe fittings adopt the PVC pressure pipe and the exhaust pipe adopts the same material as the purifying tower namely FRP or PP.